Aditeg OS-6103 100MHz Analog Oscilloscope

VERTICAL SYSTEM
Sensitivity 2mV~5V/DIV, 11 steps in 1-2-5 sequence
Sensitivity accuracy 3% (5 div at the center of display)
Vernier vertical sensitivity Countinuously variabble to 1/2.5 or less of panel-indicate value
Width of band (-3dB) DC ~100MHz(2mV/div: DC~20MHz)
Rise time 3.5ns (2mV/div:17.5ns)
Singal delay Leading edge can be monitored
Input Coupling AC, DC, GND
Input Impedance 1M2% / Approx 25pF
Vertical mode CH1, CH2, DUAL(CHOP/ALT), ADD, CH2 INV
Bandwidth limited 20MHz
Common-mode rejection ratio 50:1 or better at 50kHz
Dynamic range 8 div at 100MHz

HORIZONTAL SYSTEM
Horizontal modes MAIN(A), ALT, DELAY(B)
A(main) sweep time 50nS~0.2S/div, continuously variable(UNCAL)
B(delay) sweep time 50ns~50ms/div
Sweep accuracy 3%, 5% at x10MAG
Sweep magnificaton x10MAG (maximum sweep time 5ns/div)
Delay time 1us~5s
Delay jitter Better than 1:20000
Alternate separation Variable

X-Y OPERATION
Mode X-axis: selectable CH1, CH2, EXT
Y-axis: selectable CH1, CH2, CH1 and CH2
Sensitivity and Accuracy 2mV~5V/DIV, 3%; EXT:0.1V/div5%
X-axis bandwidth DC~500kHz(-3dB)
Phase Error 3 or less from DC~50kHz

OUTPUT SIGNAL
Voltage: approx.25mV/div into 50
Trigger signal output
Frequency response: DC~10MHz
Calibrator output 1kHz square wave, 2Vpp2%